Simplicity Meets Efficiency
How the enev-kit works
The enev-kit, the smoke extraction system with ventilation for elevator shafts, is controlled by a Control-unit with high-quality sensors. It detects not only smoke but also CO₂, humidity and temperature.
Depending on the product, the enev-kit consists of the smoke aspiration system, a plastic pipe suction line, a filter unit, a display (enev-kit e5) or point-type smoke detectors (enev-kit e1), a Control-unit and a motor-operated NRWG (natural smoke-and-heat-exhaust ventilator).
With these technologies, we can seal existing openings in elevator shafts while continuously detecting even the smallest smoke particles. The result: savings on heating energy costs, reduced CO₂ emissions, and improved air quality in elevator shafts!
Fully Automated
Discover the enev-kit
CO₂ Reduction and Heating Energy Cost Savings
The enev-kit is the leading system for smoke extraction and ventilation of elevator shafts. Fully automated and perfectly tailored to the needs of your elevator shaft, it offers an innovative solution. Traditional elevator shafts often have a permanent opening, allowing warm air to escape.
Thanks to the enev kit, you can close this opening and thus ensure greater airtightness in the building. This can save up to 30,000 kWh per elevator per year in heating energy costs and several tons of CO₂.
1. The System Measures the Temperature
Based on the room climate, the system decides whether the NRWG should be opened for ventilation.
2. The System Opens the NRWG
The NRWG opens when the CO₂ level exceeds 1500 ppm (the hygienic indoor air value for fresh air), the temperature rises above 35°C, the room climate reaches a certain humidity level, or the freely programmable intervals for burst ventilation are activated.
3. Smoke Suction System / Point-Type Smoke Detectors
Both systems continuously detect smoke particles. If smoke is detected, the built-in NRWG automatically opens to allow the smoke to escape. The enev-kit opens the NRWG automatically in the event of smoke detection, power failure, other malfunctions, or when ventilation functions are activated.
4. Monitoring (aspirating smoke detection)
The status of the system can easily be monitored via the enev-kit display. You can view all climate information, including the CO₂ ventilation levels and the temperature in the elevator shaft.
5. The Advantages
Savings on heating energy costs and CO₂ emissions, controlled ventilation, and improved air quality in the elevator shaft. Discover the advantages of the enev-kit here..
English 
Deutsch